We offers our testing services for EMI/EMC as per IEC/EN, safety  and Interface testing as per requirement of TEC as well as specified requirements & emerging regulations being notified time to time. Our pre-compliance testing suite helps you identify product deficiencies and make design adjustments to avoid costly delays to market. During the testing process, a spectrum analyzer is used to produce radiated emissions measurements. Some testing officials may also make use of a measuring antenna to facilitate the process. Tests in these ranges do not need to be applied continuously over the entire range, and the ranges may be limited to specific frequencies for compliance with specific operating bands in the country the product will be sold in - EMC Solution.

Conducted in a controlled laboratory setting, EMC testing evaluates electromagnetic interference (EMI) and electromagnetic susceptibility (EMS). Such as voltage surges, static discharges, or radiofrequency interference, ensuring the equipment continues to operate correctly. Conducted emissions refer to the amount of electromagnetic energy that is conducted into a power supply cord. During EMC testing, these emissions are carefully measured to ensure that they don’t exceed the specified limits. EMC testing questions and achieve compliance for your product. We specialize in EMC testing for wireless devices and can help you prepare for testing, test your device and get FCC, CE and other certification marks. The purpose of these tools is to measure the strength, size and compliance of radiated emissions in the most accurate way possible. Radiated emissions are disturbances that are unintentionally generated by an electronic device - EMC Testing and Measurement.  

The testing of both military and commercial electronic equipment is covered. Particular emphasis is placed on the nature of EMC test equipment and how to use it to make reliable measurements. Besides that our tests are performed under accreditation for Automotive, medical, maritime, aerospace military and railway applications. These emissions are diffused through the air and typically originate from interconnected cables. To confirm that your electronic product passes both emissions testing and immunity testing, it must undergo a formal EMC measurement process. For more information, please visit our site https://www.westek.com.au/